You must have javascript enabled to use automultimeters.us !

Car Truck 12V 24V Multimeter Circuit Tester Electrical System

Diagnostic Tool

USD $95.99

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: ANCEL PB500 Power circuit tester tool This site contains affiliate links for which we may be compensated Consumer Electronics / Vehicle Electronics & GPS / Other Vehicle Electronics

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
[Upgrade PB100] Ancle PB500 Power Circuit Probe Tester Kit - Circuit Tester Automotive for Faster Troubleshooting AC/DC Voltage, Resistance, Diode, Signal Frequency, Duty Cycle, Fuel Injection

ANCEL PB500 Digital LCD Eletricle System Probe Test

1. Diagnose 12 ~24V automotive electrical systems swiftly and accurately.

2. Show battery voltage reading and help user determine circuit polarity immediately after connecting the PB500 clips to the vehicle battery.

3. Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit, Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button for 3 seconds to switch between Waveform Display Mode and Digital Display Mode.

4. Activate electrical components and test their functions without jumper leads – by depressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.

5. Test bad ground contacts instantly without performing voltage drop tests.

6. Help user to follow and locate short circuits without using external fuses.

7. Test continuity with the assistance of its auxiliary ground lead.

8. The tool is short-circuit protected. If it becomes overloaded, Its internal circuit breaker will trip to protect the instrument from overload.

9. When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tip even when the rocker switch is pressed; however, all other functions of the tool are still active, which means you can still probe a circuit and observe the voltage reading.

 

Features

 1.Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
2.Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
3.With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
4.Simultaneously uses the hot lead and the ground lead to activate components right in your hand
5.Instantly identifies positive, negative and open circuits
6.Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
7.Instantly checks continuity of switches, relays and diodes
8.Circuit breaker protected
9.Built-in Flashlight enables you to work in the dark
10.Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
11.Long cable 6M/20ft (extendable) provides excellent accessibility to test along the vehicle
12. Powered by vehicle battery directly instead of applying extra battery inside the device. 
13. Able to be used in dark places such as engine compartments by the equipped light-emitting diode.
14. The tool is the best electrical tester for reducing diagnostic time in all 8 DC- to 30 DC Voltage vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery,

 

More Advance Features to Do Circuit Test

Fuel Inject Mode:

There are a variety of currently used techniques and tools that can test a fuel injector or injector circuitry; however it usually involves using multiple tools and tests to check every aspect of the injector circuit. Complete testing could take quite a bit of time.

Fuel Inject Mode is specifically set up for quick and easy diagnosis of the fuel injection circuit. A quick connection to the circuit and the KM50 will display all the information needed to test the injectors. To reset the maximum and minimum values, press the mode button twice.

If no valid injector pulse is detected in this mode, a bar icon will be displayed instead.

Frequency and Duty Cycle Mode:

The car's electronic control system communicates with various sensors via digital signals. When the car fails, you need to use the instrument to check whether the frequency of the signal or the duty cycle is abnormal.

Press the Mode button to enter the menu, and press the Down button momentarily to place the cursor in the frequency mode, and press the Mode button momentarily to enter the frequency waveform display mode.

Press the Mode button to enter the menu, and press the Down button momentarily to place the cursor in the Duty Cycle mode, and press the Mode button to switch to the waveform display.

Buzzer and LED light are Switchable:

When you measure the voltage DC, if the voltage is 0V, the green indicator light will be on and the buzzer will sound twice; if the voltage is above 5V, the red indicator light will be on and the buzzer will sound once. When the resistance value is less than 30Ω, the buzzer of the device sounds and the green indicator LED lights up.

DC Voltage Mode

DC mode is for testing DC (direct current) voltages. Voltage testing is as easy as contacting the probe tip to a circuit and reading the display.

DC Mode is the mode that the PB500 can supply battery power or ground by pressing the rocker switch.

AC Voltage Mode

The auxiliary ground wire is connected to one end of the circuit under test, and the probe contacts the other end of the test circuit. The LCD will display the max and mini voltage value, and display the signal waveform in real-time. You can adjust the sampling frequency by pressing the Up/Down Button.

Resistance Testing Mode

The probe contacts one end of the measured resistance, and the auxiliary ground lead is connected to the other end of the measured resistance. The LCD will display the resistance between the tip and auxiliary ground lead. When resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light. This function can be used as continuity test.

Diode Testing Mode

Contact the probe tip to diode positive terminal, connect the auxiliary ground lead to the diode negative terminal, the screen will display the forward voltage drop, which indicates forward bias. If swapping the probe tip with auxiliary ground lead, the screen will not display voltage, which indicates reverse bias. It also displays the max and mini values during measurement. 

Resistance Test: While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

Diode Test: In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reverse bias.

Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.

Testing Trailer Lights and Connections: While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground , probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.

Red/Green Polarity LED: The Red/Green Polarity LED lights up when the probe tip voltage matches the battery voltage within ±0.4 volts. It is added information that could be valuable to the technician.

Auto Circuit Breaker: The tool is short-circuit protected. Its internal circuit breaker will trip if it becomes overload. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload.

 

TIPS:

1. PB500 is ONLY for 12-24V vehicle battery electrical systems, and should NOT be used to test 110/220V household appliances or it will be damaged.

2. The LED and LCD draw no more than 100 milliamps of current. So if you use this device as a test light or multimeter, it is safe for computers and airbags.

3. When turning on components, you can extend the life of rocker switch in the tool if you first press the switch, and then apply the tip to the component. The arc will then occur at the tip and not at the metal contacts of the rocker switch.

Product Specifications Supply Voltage: 8V DC ~ 30V DC;Frequency: 0Hz ~ 1Mhz
DC/ AC Voltage Test: -110V ~ 110V Duty Cycle: 0.0~100.0%;Rating Current: 1A~8 A
Fuel Injection:Voltage: 0~180V, Time: 0~25ms Display TFT color display (160x128 dpi )
Operating Temperature -10 ~ +60°C ( 14 ~ 140°F)
Storage Temperature -20 ~ +70°C (-4 ~ 158°F )
Dimensions (L*W*H) 200mm*52mm*39mm
Net Weight 0.48Kg
(2) Electrical Specifications
Supply Voltage 8V DC ~ 30V DC
DC/ AC Voltage Test -110V ~ 110V
Frequency 0Hz ~ 1Mhz
Duty Cycle 0.0~100.0%
Fuel Injection Voltage: 0~180V, Time: 0~25ms
Resistance 0~1MΩ
Diode Germanium diode, silicon diode
Rating Current 1A~8 A
 Instrument Trip Time:
8 Amps: Hold > 1 hour.
12 Amps: current: trip in one hour.
16 Amps: current: trip in 3-30 seconds.
24 Amps: current: trip in 0.5-4.0 seconds

 Product Appearance Introduce

1) Probe Tip - Contacts the circuit orcomponent to be tested.
2) LED Lights - Illuminates dark workareas or work areas at night.
3) LCD Display - Indicates test results,test data and waveforms.
4) Red/ Green Polarity Indicator -Identifies positive, negative or open circuits. The RED Indicator lights when the Probe Tip is contacting a positive circuit. The GREEN Indicator lights when the probe tip is contacting a negative or negative voltage circuit. When the resistance is being measured, the green indicator light is on when the resistance is less than 30Ω.
5) Function Button: Switching Light ON &OFF/Up Button - short press is the up button, long press is to turn the light on/off; Mode Button - for selecting test mode; S ilent/Down Button - short press is the down button, long press is to turn on/off the buzzer.
6) Rocker Switch - Allows you to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components.
7) Auxiliary Ground Lead - Assists test as a ground lead.
8) Red/Black Alligator Clips - Clip the red alligator clip to the battery positive pole; Clip the black alligator clip to the battery negative pole.

Package List  

 

  PaymentShippingTerms of salesAbout usContact us Payment

- We accept all common forms of payment such as Credit cards、Debit card ,Google Pay ,Visa etc. 

- Payment should be made within 7 days after bidding ends.  Otherwise a Unpaid Item case will be opened to you.

 

Shipping

Will usually ship within 1 business day of receiving cleared payment .(  Excluding weekends and holidays)
 
1. Ship from USA local warehouse via UPS or USPS shipping . Delivery time varies from 2 to 5 business days  (Excluding holidays and weekends) !
 
2. We will ship according to your eBay address. Please make sure it is correct and include phone number for delivery.

3. Ship to HI, PR, AKand other overseas states and other countries requires payment of courier fees.  

4. PO.BOX address delivery is not supported.

- We are not responsible for buyers’ local taxes & Customs / import tax.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
 

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty,

- 12 months free repair for the devices.

- 60 days free return service  .

- About Free return and get labels . Please click 【Return this item】- select the return reason 【Don’t like it】 or 【Doesn't fit】 to initiate a return,  we'll buy the label for you right away , or contact us before you open a return reuest.  According to eBay return policy , 100% of the return shipping costs for the above return reasons will be covered by us !

Please contact us firstly when you need warranty service and free return service  .

In case an item arrives faulty, please contact us in 30 days and keep it unused.

We will instruct you on how to return and get refund or replacement.

If after 30 days, or the item has been used, we have the right to decline your claim.

Items should be returned on buyers’ cost for repair or replacement. 

About us

 WHO WE ARE?
We are authorize distributor for many manufatcurers.  We guarantee all items are 100% original  .

WHAT WE HAVE?
We have over 4 warehouses that are located in US.  Fast delivery .

WHAT WE SELLING ?
We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools.  

For example ---  Passenger car scanner , Diesel Commercial scanner ,Motorcycle  scanner , Mile-agecorrection tool , Key programming tool  , Smoke test , Electrical system probe test ,Battery tester ,injector cleaner etc .

Contact us

Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.

Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.  

We will reply in 24 business hours.

Business time: GMT8 (9:00-18:00) from Monday to Friday.
 

Car Truck 12V 24V Multimeter Circuit Tester Electrical System Diagnostic Tool
consumer electronics
See more
Price type
IN STOCK OUT STOCK